Heidenhain ND 1200 Bedienungsanleitung PDF herunterladen (Seite 78)

78 2 Installation and Specifications

2.2 Hardware Installation

The ND 1200 is easy to install in a variety of measurement

applications. This section describes how to install the ND 1200

hardware.

Assembling the mounting stand

The ND 1200 is secured to the swivel slots of the mounting stand by

a shoulder screw, a cap screw and associated washers.

Assemble the ND 1200 to the mounting stand as shown, and then

tighten the cap screw (5) and washers (3 & 4) so that the ND 1200 will

be secure when adjusted to the desired tilt position.

U Tighten the shoulder screw (1).

U Tighten the cap screw (5) and washers (3 & 4) so that the ND 1200

will be secure when adjusted to the desired tilt position.

U Adjust the ND 1200 to the desired tilt position.

Benchtop location and mounting

Rest the ND 1200 on a flat, stable surface, or bolt it to a stable surface

from the bottom using four 10/32 screws fastened in the pattern

shown at the right.

The dimensions are shown in millimeters.

Mounting stand assembly

Mounting hole pattern

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 140 141

Keine Kommentare

Heidenhain ND 1200 Bedienungsanleitung Seite 78